Collion Webshop/TAG-CONNECT/Microchip ICD / ICSP products

TC2030-MCP 59,50 €

Tue, 11 Jun 2024 08:40:58 +0200

6" version of the TC2030-MCP cable

TC2030-MCP-NL 59,50 €

Thu, 27 Jun 2024 14:18:28 +0200

6" version of the TC2030-MCP-NL cable.

TC2030-MCP-NL-10 59,50 €

Tue, 09 Dec 2025 10:49:21 +0100

Dies ist die längere (10" = 25,4cm) Version des TC2030-MCP-NL Kabels.

Achtung: die Länge überschreitet Microchip´s Spezifikation der maximal zulässigen Kabellänge von 8" und wird deshalb von Microchip nicht supported.
Die größere Kabellänge erleichtert allerdings die Anwendung und es sind dem Hersteller bisher keine Probleme in üblichen Einsatzszenarien bekannt geworden.
Da Microchip lediglich die maximale Länge des Programmierkabels aber nicht die Gesamtleistungslänge über den normaler Weise eingesetzten RJ12 Connector (welcher typischer Weise am Platinenrand platziert wird) spezifiziert, ist bei Einsatz des TC2030-MCP-NL eher eine Verkürzung der Leitungslänge zu verzeichnen.

TC2030-MCP-10 59,50 €

Tue, 09 Dec 2025 10:49:21 +0100

This is the 10" (longer) version of the TC2030-MCP cable.
Note that 10" exceeds the Microchip maximum cable length specification of 8" and is not supported by Microchip.
However, the additional length provides increased convenience and has not been known to cause problems in general use. Microchip to date has only specified the maximum length of the programming cable and not the typical additional length of PCB traces needed between the RJ12 connector (which might be on the edge of the PCB) and the MCU. With the much smaller TC2030 footprint you can usually put the ICD connection right at the MCU.

TC2030-PKT-NL 57,12 €

Thu, 13 Nov 2025 22:23:11 +0100

TC2030-PKT-NL 6-Pin Cable with pins for use with Microchip PICkit 3

Tag Connect TC2030-PKT-NL is primarily intended for use in development environments but is also ideal for production programming.
The spring-loaded contact pins are held firmly in place by four plastic legs each of which clips securely into its own locating hole.
Tag-Connect TC2030-PKT-NL is ideal where you need to maintain a connection to the PCB for an extended period such as when performing testing or development work.
This is a connector like the TC2030-PKT without Legs.
Ideal for both debugging and production programming.

TC2030-PKT 57,12 €

Sat, 07 Mar 2026 06:30:23 +0100

TC2030-PKT 6-Pin Cable with pins for use with Microchip PICkit 3

Tag Connect TC2030-PKT is primarily intended for use in development environments but is also ideal for production programming. The spring-loaded contact pins are held firmly in place by four plastic legs each of which clips securely into its own locating hole.
Tag-Connect TC2030-PKT is ideal where you need to maintain a connection to the PCB for an extended period such as when performing testing or development work.
See also TC2030-PKT-NL for applications where an even smaller footprint is required.
Ideal for both debugging and production programming.