Collion Webshop/TAG-CONNECT products

ECV3-10-IDC-050-20 101,15 €

Mon, 09 Mar 2026 11:30:40 +0100

ECV3-10-IDC 10-pin Castellated Board-Edge Connector to 20-pin (2*10) connector (1.27mm)

10-pin Castellated Board-Edge Connector to 10-pin 0.05″ pitch ribbon connector.

ECV3-10-IDC 104,72 €

Wed, 15 Apr 2026 11:55:54 +0200

ECV3-10-IDC 10-pin Castellated Board-Edge Connector to 10-pin IDC

10-pin Castellated Board-Edge Connector to 10-pin 0.1″ pitch ribbon connector.

ECV3-10-IDC-050 101,15 €

Mon, 09 Mar 2026 11:30:47 +0100

ECV3-10-IDC 10-pin Castellated Board-Edge Connector to 10-pin (2*5) connector (1.27mm)

10-pin Castellated Board-Edge Connector to 10-pin 0.05″ pitch ribbon connector.

ECV3-6-IDC 101,15 €

Mon, 09 Mar 2026 11:30:52 +0100

ECV3-6-IDC 6-pin Castellated Board-Edge Connector to 6-pin (2*3) IDC connector

6-pin Castellated Board-Edge Connector to 6-pin 0.1″ pitch ribbon connector.

GRIP-6 16,66 €

Sun, 12 Apr 2026 18:04:37 +0200

GRIP-6

3-Pack GRIP-6 for TC2030

TC2050-IDC 53,55 €

Sun, 15 Feb 2026 14:51:00 +0100

Tag-Connect’s TC2050-IDC Plug-of-Nails™ cable is a 10-conductor cable fitted with a spring-pin Tag-Connector that conveniently plugs directly into your PCB and terminates in a 0.1” ribbon connector.

Plugs straight to your PCB - No mating connector or header required!
Requires only a tiny footprint of pads and locating holes in your PCB.
Zero Cost Per Board! Tiny Footprint!
High-Reliability Spring-Pins make a Secure Connection and are rated for over 100,000 operations Footprint has no height and can reduce the size and space requirements of your PCB.
A great way to make test and debug signals available at no cost and with minimal board space. Tag-Connect cables provide a simple, reliable means of connecting Debuggers and Programmers or other test equipment to your PCB’s while lowering board costs and facilitating efficient production programming.
Tag-Connect uses a patented specially designed connector which eliminates the need for putting a programming header or other mating connector on every PCB.
Instead, Tag-Connect uses tried and tested spring-pins rated for over 100,000 operations to make a secure connection to a special footprint pattern of pads and locating holes in your PCB.
The legged version footprint takes about the same board space as two or three SMT resistors which means you can locate the footprint right next to the MCU if desired.
This 10-conductor cable has a TC2050 Tag-Connector on one end and a standard 0.1” ribbon connector on the other and is suitable for use with most many MCU’s / FPGA’s and JTAG programming and debug operations.

A growing range of adaptor cables are available for use with various applications, such as ARM MCU's, Xilinx SPARTAN and VERTEX FPGA’s, TI MSP430 (TC2050-IDC-430) and Renesas MCU's compatible with E1/E8a debuggers.

For full specifications, please download TC2050-IDC Datasheet See also TC2050-IDC-NL (no-legs) version with a tiny 0.03” footprint

TC2050-IDC-050-ALL 77,35 €

Fri, 16 Jan 2026 13:49:23 +0100

TC2050-IDC-050-ALL

TC2030-CTX-NL-LEMTA 59,50 €

Tue, 16 Sep 2025 11:54:45 +0200

6-poliges "No Legs" TC2030 Plug-of-Nails™ Kabel für ARM Cortex Prozessoren.

Special Version for ATMEL-ICE programmer/debugger. ATMEL-ICE contains a converted connector orientation !

Diese spezielle Kabelversion besitzt einen 6 poligen TC2030-NL Tag-Connector sowie einen 10 poligen Flachbandkabel Connector welcher zum Anschluss des FTSH-105 Mikrostecker für Cortex Debugging passt wie er beispielsweise bei Keil´s ULINK-2 Debugger zu finden ist.

das TC2030-CTX-NL Plug-of-Nailstm Connector Footprint spart über 66% Platinenfläche verglichen mit dem Einsatz des Standard FTSH-105 Mikrostecker Footprints.

Die Details des Footprint entnehmen Sie bitte dem Datasheet des TC2030-NL.

See also the TC2030-CTL "Legged" version of the cable.

For traditional ARM JTAG solutions using the 20-pin header as found on Segger's J-LINK see our TC2050-ARM2010 adapter used with TC2050-IDC (-NL) cables.

Der abgebilte Keil ULINK2 Debugger, sowie die Tag-Connect Demo PCB sowie das zusätzliche "Legged" Kabel dienen lediglich der Illustration und sind nicht Bestandteil des Artikels!

TC2030-CTX-NL-LEMTA 59,50 €

Thu, 02 Apr 2026 16:41:24 +0200

6-poliges "No Legs" TC2030 Plug-of-Nails™ Kabel für ARM Cortex Prozessoren.

Special Version for ATMEL-ICE programmer/debugger. ATMEL-ICE contains a converted connector orientation !

TC2070-IDC-NL 77,35 €

Thu, 20 Mar 2025 12:12:06 +0100

Fitted with 14-pin (2x7) 0.1" spaced ribbon cable connector. Approx 8" of ribbon cable between connectors.

Non-legged version

TC-LATTICE-10 47,60 €

Tue, 09 Sep 2025 15:48:52 +0200

Tag-connect Lattice HW-USBN-2B Programmer Adapter

TC2030-CTX-NL 59,50 €

Wed, 01 Apr 2026 09:47:17 +0200

6-poliges "No Legs" TC2030 Plug-of-Nails™ Kabel für ARM Cortex Prozessoren.

Diese spezielle Kabelversion besitzt einen 6 poligen TC2030-CTX-NL Tag-Connector sowie einen 10 poligen Flachbandkabel Connector welcher zum Anschluss des FTSH-105 Mikrostecker für Cortex Debugging passt wie er beispielsweise bei Keil´s ULINK-2 Debugger zu finden ist.

das TC2030-CTX-NL Plug-of-Nailstm Connector Footprint spart über 66% Platinenfläche verglichen mit dem Einsatz des Standard FTSH-105 Mikrostecker Footprints.

Die Details des Footprint entnehmen Sie bitte dem Datasheet des TC2030-NL.

See also the TC2030-CTL "Legged" version of the cable.

For traditional ARM JTAG solutions using the 20-pin header as found on Segger's J-LINK see our TC2050-ARM2010 adapter used with TC2050-IDC (-NL) cables.

Der abgebilte Keil ULINK2 Debugger, sowie die Tag-Connect Demo PCB sowie das zusätzliche "Legged" Kabel dienen lediglich der Illustration und sind nicht Bestandteil des Artikels!

ARM20-CTX 45,22 €

Thu, 26 Mar 2026 16:22:48 +0100

The Tag-Connect ARM20-CTX adapter board allows our TC2030-IDC cables to be used for ARM SWD (Single Wire Debug) applications.

Although intended for use with our patented TC2030-IDC (and TC2030-IDC-NL) Plug-of-Nails™ Cables, the adapter may be useful to people wishing to use 6-pin 0.1” ribbon headers on their PCB instead of the traditional 20-Pin header.

TC-FOOTPRINT-PCB 0,95 €

Mon, 16 Mar 2026 10:43:37 +0100

TC-FOOTPRINT-PCB is a small demo PCB with sample footprints for TC2030, TC2030-NL, TC2050, TC2050-NL, TC2070 and TC2070-NL footprints (6, 10 and 14-pin Legged and No-Legs footprints).

TC2050-IDC-NL-050-ALL 77,35 €

Mon, 02 Feb 2026 13:57:28 +0100

TC2050-IDC-NL-050-ALL

TC2050-ARM2010 47,60 €

Sun, 15 Feb 2026 14:51:00 +0100

TC2050-ARM2010 - for 20 pin ARM Debugger with 0,1" Pinpitch ti TC2050-IDC series

The TC2050-ARM2010 Tag-Connect adapter pcb allows the connection of the 10 pin Tag-Connect kabeln der TC2050-IDC cable family to ARM JTAG and ARM SWD (Serial Wire Debug) programmer/debug adapter.
The datasheet could be downloaded here.

The shown debugger and TC2050-IDC cable are not part of this arcticle but demonstrate the typical application.

TC2030-IDC-10 47,60 €

Tue, 25 Nov 2025 13:27:53 +0100

"Leg" Version of the TC2030-IDC cable with in 10" (25,4cm) cable length

TC2030-MCP-NL 59,50 €

Thu, 27 Jun 2024 14:18:28 +0200

6" version of the TC2030-MCP-NL cable.

TC-LATTICE 47,60 €

Mon, 27 Oct 2025 15:48:46 +0100

Tag-Connect TC-LATTICE - Lattice 12 Pin JTAG/ISP Adapter

TC-LATTICE connects the 12 pin Connector of Lattice's HW-USBN-2B Programming adapter with 2.54mm pitched 6 pin Male Connector with the patented TC2030‐IDC Plug‐of‐Nails™ cable of TC2030-IDC family.

GRIP-14 16,66 €

Mon, 16 Mar 2026 10:43:39 +0100

Collion Webshop/TAG-CONNECT products

ECV3-10-IDC-050-20 101,15 €

ECV3-10-IDC 10-pin Castellated Board-Edge Connector to 20-pin (2*10) connector (1.27mm)

ECV3-10-IDC 104,72 €

ECV3-10-IDC 10-pin Castellated Board-Edge Connector to 10-pin IDC

ECV3-10-IDC-050 101,15 €

ECV3-10-IDC 10-pin Castellated Board-Edge Connector to 10-pin (2*5) connector (1.27mm)

ECV3-6-IDC 101,15 €

ECV3-6-IDC 6-pin Castellated Board-Edge Connector to 6-pin (2*3) IDC connector

GRIP-6 16,66 €

GRIP-6

3-Pack GRIP-6 for TC2030

TC2050-IDC 53,55 €

TC2050-IDC-050-ALL 77,35 €

TC2050-IDC-050-ALL

TC2030-CTX-NL-LEMTA 59,50 €

6-poliges "No Legs" TC2030 Plug-of-Nails™ Kabel für ARM Cortex Prozessoren.

Special Version for ATMEL-ICE programmer/debugger. ATMEL-ICE contains a converted connector orientation !

TC2030-CTX-NL-LEMTA 59,50 €

6-poliges "No Legs" TC2030 Plug-of-Nails™ Kabel für ARM Cortex Prozessoren.

Special Version for ATMEL-ICE programmer/debugger. ATMEL-ICE contains a converted connector orientation !

TC2070-IDC-NL 77,35 €

TC-LATTICE-10 47,60 €

TC2030-CTX-NL 59,50 €

6-poliges "No Legs" TC2030 Plug-of-Nails™ Kabel für ARM Cortex Prozessoren.

ARM20-CTX 45,22 €

TC-FOOTPRINT-PCB 0,95 €

TC2050-IDC-NL-050-ALL 77,35 €

TC2050-IDC-NL-050-ALL

TC2050-ARM2010 47,60 €

TC2050-ARM2010 - for 20 pin ARM Debugger with 0,1" Pinpitch ti TC2050-IDC series

TC2030-IDC-10 47,60 €

"Leg" Version of the TC2030-IDC cable with in 10" (25,4cm) cable length

TC2030-MCP-NL 59,50 €

TC-LATTICE 47,60 €

Tag-Connect TC-LATTICE - Lattice 12 Pin JTAG/ISP Adapter

GRIP-14 16,66 €

GRIP-14

3-Pack GRIP-14 for TC2070