Collion Webshop/TAG-CONNECT/TC2030 - 6 Pin Series products

TC2030-PKT-NL 57,12 €

Thu, 13 Nov 2025 22:23:11 +0100

TC2030-PKT-NL 6-Pin Cable with pins for use with Microchip PICkit 3

Tag Connect TC2030-PKT-NL is primarily intended for use in development environments but is also ideal for production programming.
The spring-loaded contact pins are held firmly in place by four plastic legs each of which clips securely into its own locating hole.
Tag-Connect TC2030-PKT-NL is ideal where you need to maintain a connection to the PCB for an extended period such as when performing testing or development work.
This is a connector like the TC2030-PKT without Legs.
Ideal for both debugging and production programming.

TC2030-PKT 57,12 €

Sat, 07 Mar 2026 06:30:23 +0100

TC2030-PKT 6-Pin Cable with pins for use with Microchip PICkit 3

Tag Connect TC2030-PKT is primarily intended for use in development environments but is also ideal for production programming. The spring-loaded contact pins are held firmly in place by four plastic legs each of which clips securely into its own locating hole.
Tag-Connect TC2030-PKT is ideal where you need to maintain a connection to the PCB for an extended period such as when performing testing or development work.
See also TC2030-PKT-NL for applications where an even smaller footprint is required.
Ideal for both debugging and production programming.

TC2030-ALT-NL 77,35 €

Mon, 27 Oct 2025 16:12:50 +0100

The TC2030-ALT-NL cable is a special cable that has a TC2030 Tag-Connector at one end and a 10-pin 0.1" pitch female IDC connector at the other. The 10-pin IDC can be plugged directly into some Altera USB Blasters and ByteBlasters.

The cable is wired as follows:

TC2030-ALT-NL Connections
TC2030-NL	10-pin 0.1" IDC
1	4 Vref
2	5 TMS
3	9 TDI
4	1 TCLK
5	2,10 GND
6	3 TDO

Please refer to the TC2030-IDC-NL datasheet for details of the TC2030-NL connector and footprint.

TC2030-ALT 77,35 €

Mon, 27 Oct 2025 16:11:35 +0100

The TC2030-ALT cable is a special cable that has a TC2030 Tag-Connector at one end and a 10-pin 0.1" pitch female IDC connector at the other.

The 10-pin IDC can be plugged directly into some Altera USB Blasters and ByteBlasters.

The cable is wired as follows:

TC2030-ALT Connections
TC2030	10-pin 0.1" IDC
1	4 Vref
2	5 TMS
3	9 TDI
4	1 TCLK
5	2,10 GND
6	3 TDO

Please refer to the TC2030-IDC datasheet for details of the TC2030 connector and footprint.

3,57 €

Thu, 02 Apr 2026 16:41:24 +0200

GRIP-6 16,66 €

Sun, 12 Apr 2026 18:04:37 +0200

GRIP-6

3-Pack GRIP-6 for TC2030

TC-LATTICE 47,60 €

Mon, 27 Oct 2025 15:48:46 +0100

Tag-Connect TC-LATTICE - Lattice 12 Pin JTAG/ISP Adapter

TC-LATTICE connects the 12 pin Connector of Lattice's HW-USBN-2B Programming adapter with 2.54mm pitched 6 pin Male Connector with the patented TC2030‐IDC Plug‐of‐Nails™ cable of TC2030-IDC family.

TC2030-MCP-NL 59,50 €

Thu, 27 Jun 2024 14:18:28 +0200

6" version of the TC2030-MCP-NL cable.

TC2030-MCP-NL-10 59,50 €

Tue, 09 Dec 2025 10:49:21 +0100

Dies ist die längere (10" = 25,4cm) Version des TC2030-MCP-NL Kabels.

Achtung: die Länge überschreitet Microchip´s Spezifikation der maximal zulässigen Kabellänge von 8" und wird deshalb von Microchip nicht supported.
Die größere Kabellänge erleichtert allerdings die Anwendung und es sind dem Hersteller bisher keine Probleme in üblichen Einsatzszenarien bekannt geworden.
Da Microchip lediglich die maximale Länge des Programmierkabels aber nicht die Gesamtleistungslänge über den normaler Weise eingesetzten RJ12 Connector (welcher typischer Weise am Platinenrand platziert wird) spezifiziert, ist bei Einsatz des TC2030-MCP-NL eher eine Verkürzung der Leitungslänge zu verzeichnen.

TC2030-IDC-NL-10 47,60 €

Sun, 12 Apr 2026 18:04:37 +0200

This is the longer 10" version of our TC2030-IDC-NL cable.
The product datasheet can be found here.
See also the "Legged" TC2030-IDC-10 version.

TC2030-IDC-NL 47,60 €

Tue, 24 Mar 2026 11:31:19 +0100

This is the 6" version of our TC2030-IDC-NL cable.
The product datasheet can be found here.
See also the "Legged" TC2030-IDC version.

TC2030-CTX-NL-LEMTA 59,50 €

Tue, 16 Sep 2025 11:54:45 +0200

6-poliges "No Legs" TC2030 Plug-of-Nails™ Kabel für ARM Cortex Prozessoren.

Special Version for ATMEL-ICE programmer/debugger. ATMEL-ICE contains a converted connector orientation !

Diese spezielle Kabelversion besitzt einen 6 poligen TC2030-NL Tag-Connector sowie einen 10 poligen Flachbandkabel Connector welcher zum Anschluss des FTSH-105 Mikrostecker für Cortex Debugging passt wie er beispielsweise bei Keil´s ULINK-2 Debugger zu finden ist.

das TC2030-CTX-NL Plug-of-Nailstm Connector Footprint spart über 66% Platinenfläche verglichen mit dem Einsatz des Standard FTSH-105 Mikrostecker Footprints.

Die Details des Footprint entnehmen Sie bitte dem Datasheet des TC2030-NL.

See also the TC2030-CTL "Legged" version of the cable.

For traditional ARM JTAG solutions using the 20-pin header as found on Segger's J-LINK see our TC2050-ARM2010 adapter used with TC2050-IDC (-NL) cables.

Der abgebilte Keil ULINK2 Debugger, sowie die Tag-Connect Demo PCB sowie das zusätzliche "Legged" Kabel dienen lediglich der Illustration und sind nicht Bestandteil des Artikels!

TC2030-CTX-20 65,45 €

Fri, 17 Jan 2025 10:33:42 +0100

This cable is the same as the TC2030-CTX cable except it has a 20-pin connector compatible with i-Jet and ULINK pro.

The cable itself has a ten pin ribbon cable and 6-pin TC2030 Tag-Connect footprint supporting ARM Cortex MCU's.

Please refer to the TC2030-CTX datasheet. IAR's I-JET not included!

TC2030-CTX-NL-LEMTA 59,50 €

Thu, 02 Apr 2026 16:41:24 +0200

6-poliges "No Legs" TC2030 Plug-of-Nails™ Kabel für ARM Cortex Prozessoren.

Special Version for ATMEL-ICE programmer/debugger. ATMEL-ICE contains a converted connector orientation !

TC2030-CTX-NL 59,50 €

Wed, 01 Apr 2026 09:47:17 +0200

6-poliges "No Legs" TC2030 Plug-of-Nails™ Kabel für ARM Cortex Prozessoren.

Diese spezielle Kabelversion besitzt einen 6 poligen TC2030-CTX-NL Tag-Connector sowie einen 10 poligen Flachbandkabel Connector welcher zum Anschluss des FTSH-105 Mikrostecker für Cortex Debugging passt wie er beispielsweise bei Keil´s ULINK-2 Debugger zu finden ist.

das TC2030-CTX-NL Plug-of-Nailstm Connector Footprint spart über 66% Platinenfläche verglichen mit dem Einsatz des Standard FTSH-105 Mikrostecker Footprints.

Die Details des Footprint entnehmen Sie bitte dem Datasheet des TC2030-NL.

See also the TC2030-CTL "Legged" version of the cable.

For traditional ARM JTAG solutions using the 20-pin header as found on Segger's J-LINK see our TC2050-ARM2010 adapter used with TC2050-IDC (-NL) cables.

Der abgebilte Keil ULINK2 Debugger, sowie die Tag-Connect Demo PCB sowie das zusätzliche "Legged" Kabel dienen lediglich der Illustration und sind nicht Bestandteil des Artikels!

TC2030-MCP 59,50 €

Tue, 11 Jun 2024 08:40:58 +0200

6" version of the TC2030-MCP cable

TC2030-CTX-20-NL 65,45 €

Fri, 10 Apr 2026 15:52:18 +0200

This cable is the same as the TC2030-CTX-NL cable except it has a 20-pin Cortex connector compatible with IAR's I-Jet and Keil's ULINK pro and similar. The cable itself uses a ten pin ribbon cable and 6-pin TC2030 Tag-Connect footprint supporting ARM Cortex MCU's. Please refer to the TC2030-CTX-NL datasheet.

TC2030-CLIP-3PACK 26,18 €

Fri, 20 Mar 2026 17:50:29 +0100

This is a Set of 3* TC2030-CLIP

This product is intended to temporarily hold a TC2030 -NL ("No Legs") cable in place on a PCB.

This solution will help when board space is at a premium and you need a hands free solution for debugging.

We recommend keeping a few spare of these since the tiny boards are easy to misplace when working on the bench.

For a more robust solution consider a TC2030-IDC or TC2030-MCP legged cable.

TC2030-IDC-10 47,60 €

Tue, 25 Nov 2025 13:27:53 +0100

"Leg" Version of the TC2030-IDC cable with in 10" (25,4cm) cable length

TC2030-CTX-NL-LEMTA 59,50 €

Tue, 17 Mar 2026 23:34:11 +0100