TC2030-FTDI-TTL-232RG-VIP USB to TC2030 Serial Cable
The Tag-Connect FTDI TTL to USB Serial Converter features a 6-pin tag-connect connector with “legs” on the PCB side.
In this version, the signal level of the serial lines can be set to match the board’s I/O voltage between 1.8 V and 5 V by means of the VCCIO pin.
FTDI-TTL-232RG-VIP Specification
VCC: 1.8V to 5.25V
UART TTL level signals: VCC
Data rates: 3Mbps
Notes: VCC is a required Input, UART signal output levels match VCC and won’t be present if VCC is not connected
Nominal cable length: 1.8m.
TC2030 Connections
| TC2030 pin | FTDI Signal | Type | Description |
|---|---|---|---|
| 1 | VCCIO (RED) | Input | VCC input. Power and voltage levels for the UART signals are supplied from the customers interface logic |
| 2 | CTS / TMS (BROWN) | Input | Clear to Send Control input / Handshake signal |
| 3 | RXD / TDI (YELLOW) | Input | Receive Asynchronous Data input |
| 4 | TXD / TCLK (ORANGE) | Output | Transmit Asynchronous Data output |
| 5 | GND (BLACK) | GND | Device ground supply pin |
| 6 | RTS / TDO (GREEN) | Output | Request To Send Control Output / Handshake signal |
